The Stock Citation radiator has been used for this swap, however the upper radiator hose requires some modification.
This small piece was picked up from Autozone and will prove to be very useful.
This 1" inner diamater hose coupler was picked up from Lowe's Hardware
With the coupler in place, the two hoses become ONE
Picked up this VERY interesting radiator hose which turned out to be perfect as a lower radiator hose
Lower Radiator hose installed
There is VERY little clearance between the exhaust crossover and the brake master cylinder, but the poly engine mounts will keep everything in check
With the PS pump fully installed, the old location of the strut tower brace will no longer work.
No problem...JUST MOVE IT
The Hood support falls perfectly into place in on the newly located strut support.
Completed Passenger's side view
Completed Driver's Side view
Hood Reinstalled...
The axles arrive tomorrow...then, BACK to the STREETS !!!